IEEE 386-2016 pdf free download – IEEE Standard for Separable Insulated Connector Systems for Power Distribution Systems Rated 2.5 kV through 35 kV.
multi-way junction: See multi-point separable insulated connector
operating ryr An integral part of an elbow or other accessory device designed for the attachment of a Incline tool used to Isandle or operate the device
operating interface: The surfaces at which a connector is normally separated. NOTE—See Figure I. Figsire 21. Figure 22, Figure 23,aid Figure 24.
parking stand feed4liru well A multi-way junction device consisting of interconnected bushing wells that can he mounted in a parking stand.
probe- The internal, separable. current carrying part of an elbow or insulated cap (uaually in the form of a metal rod or bolt) that connects the conductor compression lug to the bushing portion of the separable connector.
reducing tap plug An accessory device designed flit the transition of a 600-A or 900-A deadbreak system to a 200 A deadbreak or loadbreak system.
NOTE—See Figuie 23.
reducing tap well A connector that provides a transition from a 6(10-A or 900-A elbow to a 200 A bushing well.
NOTE—See t-igurc 2
separable insulated connector A tiilly insulated and shielded component used to a) terminate and insulate a power cable. b) terminate or insulate another electrical component. ore) connect an insulated power cable to electrical apparatus. other power cables, or both. The electrical connection can be readily established or broken by engaging or separating at the operating interface.
NOT’E—Therenesariota typesof separablecotwiectors; seeFrjrirc t. Figure2l. Figure22. Figure 23,atsd Figure 24,
sliurt4inse current rating The designated mis current that a connector can carry for a specified. limited period of time under specified condttions.
straight plug- An in-line connector that provides a transition from a cable to a bushing interface. NOTE—See Figure 22,
straight separable insulated connector A device with two interconnected interfaces that electrically insulate. electrically shield and seal the interfaces where the two interfaces are tn-line with each other Typical devices include bushing inserts, tap wells, tap plugs. connecting plugs, bushing extenders, 1” disconnectable bus connectors and straight connectors.
NOTE—See Figuie I. Figsite 21, Figure 22, Figure 23.aid I- gure 24.
tee separable insulated connector A device with three intereonnected interfaces that electrically insttlate, electrically shield and seal the tnterfaces where two interfaces are in-line with each other and the third interface is at a right angle to the first two. Typical devices incltide tees, tap plug tees, and tap well tees.
NOTE—See Figure 22 and Figure 23, test point A capacitively coupled terminal for use with voltage sensing devices. NOTE—See Figure I.IEEE 386 pdf download.