IEC 62560-2011 pdf free download – Self-ballasted LED-lamps for general lighting services by voltage > 50 V – Safety specifications.
This International Standard specifies the safety and interchangeability requirements， togetherwith the test methods and conditions required to show compliance of LED-lamps withintegrated means for stable operation (self-ballasted LED-lamps)， intended for domestic andsimilar general lighting purposes, having:
-a rated wattage up to 6o w;
– a rated voltage of > 50 v up to 250 v;
-caps according to Table 1.
The requirements of this standard relate only to type testing.
Recommendations for whole product testing or batch testing are identical to those given inAnnex C of lEC 62031.
NOTE Where in this standard the term“lamp(s)” is used，it is understood to stand for “self-ballasted LED-lamp(s)”,except where it is obviously assigned to other types of lamps.
2Normative references
The following reference documents are indispensable for the application of this document. Fordated references, only the edition cited applies.For undated references, the latest edition ofthe reference document (including any amendments) applies.
IEC 60061-1, Lamp caps and holderstogether with gauges for the control ofinterchangeability and safety – Part 1 : Lamp caps
IEC 60061-3， Lamp caps and holders together with gauges for the control ofinterchangeability and safety – Part 3 : Gauges
IEC 60360，Standard method of measurement of lamp cap temperature rise
IEC 60432-1，Incandescent lamps – Safety specifications – Part 1: Tungsten filament lampsfor domestic and similar general lighting purposes
IEC 60529:1989,Degrees of protection provided by enclosures (IP Code)
lEC 60598-1:2008,Luminaires – Part 1: General requirements and tests
IEC 60695-2-10:2000，Fire hazard testing – Part 2-10: Glowing/hot-wire based test methods;Glow-wire apparatus and common test procedure
IEC 60695-2-11:2000， Fire hazard testing – Part 2-11: Glowing/hot-wire based test methods -Glow-wire flammability test method for end products
IEC 60695-2-12;2000，Fire hazard testing – Part 2-12: Glowing/hot-wire based test methods;Glow-wire flammability test method for materials
IEC 60695-2-13:2000，Fire hazard testing – Part 2-13: Glowing/hot-wire based test methods;Glow-wire ignitability test method for materials
IEC 61199:1999,Single-capped fluorescent lamps – Safety specifications
IEC 61347-1:2007,Lamp controlgear – Part 1: General and safety requirementsIEC 62031:2008,LED modules for general lighting – Safety requirements
IEC/TR 62471-2，Photobiological safety of lamps and lamp systems – Part 2: Guidance onmanufacturing requirements relating to non-laser optical radiation safety
IEC/TS 62504,Terms and definitions of LEDs and LED modules in general lighting1
ISO 4046-4;2002，Paper,board，pulp and related terms – Vocabulary – Part 4: Paper andboard grades and converted products
3Terms and definitions
For the purposes of this document, the terms and definitions of IEC/TS 62504 (inpreparation),IEC 62031 and the following apply.
3.1
self-ballasted LED-lamp
unit which cannot be dismantled without being permanently damaged，provided with a lampcap and incorporating a LED light source and any additional elements necessary for stableoperation of the light source
NOTE Lamp caps are given in lEC 60061-1.3.2
rated voltage
voltage or voltage range marked on the lamp
3.3
rated wattage
wattage marked on the lamp
3.4
rated frequency
frequency marked on the lamp
3.5
cap temperature risets
surface temperature rise (above ambient) of a standard test lampholder fitted to the lamp,when measured in accordance with the standard method, in case of an Edison screw cap or abayonet cap
NOTE The standard method for Edison screw cap or bayonet cap is that given in lEC 60360.
3.6
live part
conductive part which may cause an electric shock in normal use
4 General requirements and general test requirements
4.1 The lamps shall be so designed and constructed that in normal use they function reliably and cause no danger to the user or surroundings.
In general, compliance is checked by carrying out all the tests specified.IEC 62560 pdf download.