BS ISO 7409-2018 pdf free download.Fertilizers — Marking — Presentation and declarations
1 Scope
This document specifies the procedure for marking containers or labels for fertilizers.
This document is applicable to all fertilizers in containers or bulk.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at https:// www .electropedia .org/
4 Principle
Establishment of the label size, the position of the declarations and the size of the characters (letters and figures) so as to enable the user to identify the fertilizer and to determine its characteristics. These details will vary according to whether the container holds:
— more than 25 kg (or 25 l) of fertilizer,
— from 5 kg to 25 kg (or 5 l to 25 l) of fertilizer,
— less than 5 kg (or 5 l) of fertilizer, or
— bulk fertilizer.
See Figures A.1, C.1 and E.1 for examples of marking and labelling.
NOTE Ton bags are usually considered as bulk fertilizer.
5 General requirements
5.1 Declarations shall be legible and indelibly marked on a uniform and contrasting background.
5.2 Any declarations on the marking should be truthful, accurate and extremely clear.
5.3 False, deceptive, exaggerated, untruthful or misleading claims shall not be made on the product packaging or label.
5.4 The smallest letters used in declaration or marking shall be clear, firm and readable.
6 Types of marking
Marking can take the form of package markings, quality assurance documents, labels, electronic labels, etc. The information can be added to bags by printing, labels, stickers, etc. The use of electronic labels, such as two-dimensional (2D) codes, is encouraged. Electronic labels should be legible and conspicuous on a discrete area of the principal display panel and shall include, at a minimum, the information related to package markings.
7 Pre-marked containers
7.1 Containers holding more than 25 kg (or 25 l) of fertilizer
7.1.1 Marking technical details Position: A rectangular space for marking shall be located in the centre of one of the main faces of the container/label. The edges of the space shall be parallel to the edges of the container. Measurement: Its edges shall be at least 65 % of the length of the container. The total area for marking shall be at least 10 % of the face selected. Label information: The technical information of the label on the container should be easy to read. Any picture, brand or logo used in the marking should not obstruct the quick identification of text messages. Declarations shall be marked within the above-mentioned area. It is recommended that the type and grade be also marked on the sides or gussets of non-rigid containers.
NOTE The front side of the container often contains the brand or logo.
7.1.2 General instructions for the size of characters Three sizes of characters shall be used, according to the area of the space for marking (7.1.1), so that the information can be set out clearly. These three sizes shall be in a ratio X/Y/Z, which may vary only within the limits indicated in Table 1. The size of lower-case characters shall be determined by the height of the letters without a down stroke (for example, e, o, u, n). The height of the upper-case characters shall be typographically consistent with the height of the lower- case characters.BS ISO 7409 pdf download.