BS IEC 61196-9-1 2015 pdf free download – Coaxial communication cables Part 9-1: Flexible RF coaxial cables — Blank detail specification.
This part of lEC 61196，which is a blank detail specification，applies to RF flexible coaxialcommunication cables described in lEC61196-9.
This blank detail specification is to be read in conjunction with lEC 61196-1 and IEC 61196-9.lt determines the layout and style for detail specification.
Detail specifications,based on this blank detail specification，may be prepared by a nationalorganization, a manufacturer or a user.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document andare indispensable for its application. For dated references,only the edition cited applies.Forundated’references,the latest edition of the referenced document (including anyamendments) applies.
IEC 60068-2-20:2008,Environmental testing – Part 2-20:Tests -Test T: Test methods forsolderability and resistance to soldering heat of devices with leads
IEC 61196-1:2005,Coaxial communication cables – Part 1: Generic specification – General,definitions and requirements
IEC 61196-1-314:2006,Coaxial communication cables – Part 1-314: Mechanical test methods- Test for bending
IEC 61196-9:2014，Coaxial communication cables – Part 9: Sectional specification for RFflexible cables
IEC 62037-1:2012,Passive RF and microwave devices, intermodulation level measurement -Part 1: General requirements and measuring methods
NOTE Documents which are needed to achieve the tests according to Clause 4, item [9] or item [10], respectively,are listed in lEC 61196-9.
3Guidance for the preparation of detail specifications
The detail specification shall be written in accordance with the layout of the blank detailspecification, which forms part of this standard.
When a characteristic does not apply,then na (for not applicable) should be entered in theappropriate space.
When a characteristic applies but a specific value is not considered necessary, then ns (fornot specified) should be entered in the appropriate space.
The numbers shown in brackets in this and the following pages correspond to the following items of required information, which should be entered in the space provided.
[1 ] Name and address of the organization that has prepared the document
[2] IEC document number and date of issue
[3] Address of the organization from which the document is available
[4] Related documents
[5] Any other references to the cable, national reference, trade name, etc.
[6] Description of the cable
[7] Details of the cable construction
[8] Engineering information of the cable, provided by the manufacturer
[9] List of the finished cable characteristics. They are separated into electrical,environmental and mechanical characteristics
[1 0] Reference to the relevant subclause of the sectional specification IEC 61 1 96-9
[1 1 ] Minimum requirements, the values entered shall meet as a minimum the requirements of sectional specification IEC 61 1 96-9
[1 2] Relevant requirements.BS IEC 61196-9-1 pdf download.