ANSI SCTE 15-2016 pdf free download – Specification for a 75 ohm ‘MMCX’ Connector (MMCX-75), Male & Female Interface
The purpose of this document is to specify requirements for the male/female interface of a 75 ohm, 3 GHz rated connector series generically known as MMCX-75. This is an indoor connector with applications in controlled environments such as headends and hubsites where high density platform chassis are used. MMCX-75 connectors are not intended to be mated with 50 ohm MMCX design counterparts. All requirements of this document are measured after installation per manufacturer’s instructions of the cable into the connector.
This document will address only the interface, not the connector body, the cable requirements, and the connector attachment to the cable or PC board. Mechanical, electrical and environmental performance is defined to ensure a reliable connection for permanent installations, as well as temporary adapters and calibration standards.
2. Normative References
The following documents contain provisions, which, through reference in this text, constitute provisions of the standard. At the time of Subcommittee approval, the editions indicated were valid. All standards are subject to revision; and while parties to any agreement based on this standard are encouraged to investigate the possibility of applying the most recent editions of the documents listed below, they are reminded that newer editions of those documents may not be compatible with the referenced version.
2.1. SCTE References
ANSI/SCTE 04 2014 – Test Method for “F” Connector Return Loss
ANSI/SCTE 48-1 2015 – Test Method for Measuring Shielding Effectiveness of Passive and Active Devices Using a GTEM Cell
ANSI/SCTE 103 2012 – Test Method for DC Contact Resistance, Drop cable to FConnectors and F81 Barrels
ANSI/SCTE 144 2012 – Test Procedure for Measuring Transmission and Reflection
2.2. Standards from other Organizations
Bellcore GR-1503-CORE 4.8
IEC 60169-1
EIA-364-65
MIL-STD-202
3. Informative References
The following documents may provide valuable information to the reader but are not required when complying with this standard.
3.1. Standards from other Organizations
MIL-STD-889.ANSI SCTE 15 pdf download.