ANSI SCTE 116-2018 pdf free download – Specification for 5/8-24 Port, Female Adapters.
1. Introduction
1.1. Executive Summary
Mechanical Specification that define the Female 5/8-24 Adapter Ports.
1.2. Scope
The purpose of this specification is to serve as a recommended guideline for the physical dimensions of female 5/8 – 24 port that is used on hard-line adapters for interconnection in the 75 ohm RF broadband communications industry. It is not the purpose of this standard to specify the details of manufacturing.
1.3. Benefits
Specification for uniform compliance.
1.4. Intended Audience
Equipment manufacturers.
1.5. Areas for Further Investigation or to be Added in Future Versions
None
2. Normative References
The following documents contain provisions, which, through reference in this text, constitute provisions of this document. At the time of Subcommittee approval, the editions indicated were valid. All documents are subject to revision; and while parties to any agreement based on this document are encouraged to investigate the possibility of applying the most recent editions of the documents listed below, they are reminded that newer editions of those documents might not be compatible with the referenced version.
2.1. SCTE References
• No normative references are applicable.
2.2. Standards from Other Organizations
• No normative references are applicable.
2.3. Published Materials
• No normative references are applicable.
3. Informative References
The following documents might provide valuable information to the reader but are not required when complying with this document.
3.1. SCTE References
• No informative references are applicable.
3.2. Standards from Other Organizations
• No informative references are applicable.
3.3. Published Materials
• No informative references are applicable.
6. General Requirements
Samples of the finished products shall be inspected to ensure that they conform to the physical
dimensions specified in this document.
7. Physical Dimensions
The recommended physical dimensions for 5/8-24 female adapter ports shall be as specified in Figure 1.ANSI SCTE 116 pdf download.