ANSI SCTE 111-2017 pdf free download – Specification for 5/8-24 Plug, Male Adaptors.
1.1. Scope
The purpose of this specification is to serve as a recommended guideline for the physical dimensions of 5/8 – 24 plug (male) hard-line adapters that are used as interconnects in the 75 ohm RF broadband communications industry. It is not the purpose of this standard to specify the details of manufacturing.
2. Normative References
The following documents contain provisions, which, through reference in this text, constitute provisions of this document. At the time of Subcommittee approval, the editions indicated were valid. All documents are subject to revision; and while parties to any agreement based on this document are encouraged to investigate the possibility of applying the most recent editions of the documents listed below, they are reminded that newer editions of those documents might not be compatible with the referenced version.
2.1. SCTE References
• No normative references are applicable.
2.2. Standards from Other Organizations
• No normative references are applicable.
2.3. Published Materials
• No normative references are applicable.
3. Informative References
The following documents might provide valuable information to the reader but are not required when
complying with this document.
3.1. SCTE References
• No informative references are applicable.
3.2. Standards from Other Organizations
• No informative references are applicable.
3.3. Published Materials
• No informative references are applicable.
• Abbreviations and Definitions
5.1. Definitions
Reference Plane The reference plane on the male 5/8-24 plug is the mating surface that seats with the female 5/8-24 equipment port.
6. General Requirements
Samples of the finished products shall be measured, tested and inspected to insure that they conform to the dimensions of this document.ANSI SCTE 111 pdf download.