BS EN 3645-010-2019 pdf free download.Aerospace series – Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous Part 010: Receptacle, hermetic, round flange, jam nut mounting – Product standard This European Standard specifies the characteristics of hermetic receptacles with jam nut mounting in the family of circular, electrical connectors, with triple start threaded coupling.
It applies to models in Table 3.
For plugs and protective covers, see EN 3645-006, EN 3645-008, EN 3645-011 and EN 3645-012 respectively.
The contacts are unremovable and soldered termination.
These connectors are derived from and interchangeable with model Y in specification MIL-DTL-38999/23.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 3645-001, Aerospace series — Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Part 001: Technical specification
EN 3645-002, Aerospace series — Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Part 002: Specification of performance and contact arrangements
EN 3645-006, Aerospace series — Connectors, electrical, circular, scoop-proof, triple start threaded
coupling, operating temperature 175 °C or 200 °C continuous — Part 006: Protective cover for receptacle — Product standard
EN 3645-008, Aerospace series — Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Part 008: Non release plug with grounding ring — Product standard
EN 3645-011, Aerospace series — Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Part 011: Lanyard release plug with grounding fingers — Type 1 — Product standard
EN 3645-012, Aerospace series — Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous — Part 012: Lanyard release plug with grounding fingers — Type 2 — Product standard
MIL-DTL-38999/23, Connectors, electrical, circular, threaded, receptacle, jam-nut mounting, hermetic,hermetic solder contacts, series III, metric 1)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 3645-001 apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
4 Required characteristics
4.1 Dimensions and mass
See Figure 1 and Table 1.
4.2 Materials and surface treatment
See Table 3.
4.3 Recommended panel cut-out
See Figure 2 and Table 2.
4.4 Electrical, mechanical and climatic characteristics
See EN 3645-002.
5 Designation
EXAMPLE
Description block
ELECTRICAL CONNECTOR
Identity block
EN3645-Y7GN35MA
Number of the basic standard
Model (see Table 3)
Shell code for jam nut mounting receptacle (see EN 3645-002)
Shell size code (see Table 4)
Only N: no grounded cavity
Contact arrangement (see EN 3645-002) except those
containing coaxial or triaxial contacts or size 10 contacts or quadrax contacts
Contact code
M: male with solder cup
X: male with eyelet
Polarization: N, A, B, C, D, E
NOTE If necessary, the code I9005 shall be placed between the description block and the identity block.
6 Marking
According to EN 3645-001.
7 Technical specification
According to EN 3645-001.BS EN 3645-010 pdf download.