BS 6349-1-4-2021 pdf free download.Maritime works Part 1-4: General — Code of practice for materials
1 Scope
This part of BS 6349 gives recommendations for the materials used in the design and construction of maritime environment structures, and includes specific provisions for use in a seawater environment.
NOTE Materials used in these conditions are often subject to more onerous environmental conditions than onshore structures, and thus particular attention is paid to the use of durable materials to provide the required performance and design life.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes provisions of this document 1) . For dated references, only the edition cited
applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
Standards publications
ANSI/AWWA C217, Microcrystalline wax and petrolatum tape coating systems for steel water pipe and fittings
ASTM D1765, Standard classification system for carbon blacks used in rubber products
BS 4449, Steel for the reinforcement of concrete – Weldable reinforcing steel – Bar, coil and decoiled product – Specification
BS 4482, Steel wire for the reinforcement of concrete products – Specification
BS 4483, Steel fabric for the reinforcement of concrete – Specification
BS 4486, Specification for hot rolled and hot rolled and processed high tensile alloy steel bars for the prestressing of concrete
BS 5896, High tensile steel wire and strand for the prestressing of concrete – Specification
BS 6349-1-1, Maritime works – Part 1-1: General – Code of practice for planning and design for operations
BS 6349-4, Maritime works – Part 4: Code of practice for design of fendering and mooring systems
BS 6744, Stainless steel bars – Reinforcement of concrete – Requirements and test methods
BS 7371-6, Coatings on metal fasteners – Part 6: Specification for hot dipped galvanized coatings BS 7542, Method of test for curing compounds for concrete
BS 8500-1:2015+A2:2019, Concrete – Complementary British Standard to BS EN 206 – Part 1: Method of specifying and guidance for the specifier
BS 8500-2, Concrete – Complementary British Standard to BS EN 206 – Part 2: Specification for constituent materials and concrete
BS 8666, Scheduling, dimensioning, cutting and bending of steel reinforcement for concrete – Specification
BS EN 206, Concrete – Specification, performance, production and conformity 2)
BS EN 446, Grout for prestressing tendons – Grouting procedures
BS EN 447, Grout for prestressing tendons – Basic requirements
BS EN 523, Steel strip sheaths for prestressing tendons – Terminology, requirements, quality control
BS EN 912, Timber fasteners – Specifications for connectors for timbers
BS EN 1090-1, Execution of steel structures and aluminium structures – Part 1: Requirements for conformity assessment of structural components
BS EN 1090-2, Execution of steel structures and aluminium structures – Part 2: Technical requirements for steel structures
BS EN 1090-3, Execution of steel structures and aluminium structures – Part 3: Technical requirements for aluminium structures
BS EN 1097-1, Tests for mechanical and physical properties of aggregates – Part 1: Determination of the resistance to wear (micro-Deval)
BS EN 1337-3:2005, Structural bearings – Elastomeric bearings
BS EN 1369, Founding – Magnetic particle testing
BS EN 1559-1, Founding – Technical conditions of delivery – Part 1: General 3)
BS EN 1559-2, Founding – Technical conditions of delivery – Part 2: Additional requirements for steel castings 3)
BS EN 1561, Founding – Grey cast irons
BS EN 1563, Founding – Spheroidal graphite cast irons
BS EN 1990, Eurocode – Basis of structural design
BS EN 1992 (all parts), Eurocode 2 – Design of concrete structures
BS EN 1993 (all parts), Eurocode 3 – Design of steel structures 4)
BS EN 1995 (all parts), Eurocode 5 – Design of timber structures
BS EN 1999 (all parts), Eurocode 9 – Design of aluminium structures 5)
BS EN 10025 (all parts), Hot rolled products of structural steels
BS EN 10080, Steel for the reinforcement of concrete – Weldable reinforcing steel – General
BS EN 10164, Steel products with improved deformation properties perpendicular to the surface of the product – Technical delivery conditions
BS EN 10210 (all parts), Hot finished steel structural hollow sections
BS EN 10219 (all parts), Cold formed welded steel structural hollow sections
BS EN 10248 (all parts), Hot rolled sheet piling of non alloy steels
BS EN 10249 (all parts), Cold formed sheet piling of non alloy steels
BS EN 10348-2, Steel for the reinforcement of concrete – Galvanized reinforcing steel –Part 2: Galvanized reinforcing steel products
BS EN 12680-3, Founding – Ultrasonic testing – Part 3: Spheroidal graphite cast iron castings BS EN 12954, General principles of cathodic protection of buried or immersed onshore metallic structures
BS EN 13383 (all parts), Armourstone 6)
BS EN 13670, Execution of concrete structures
BS EN 14545, Timber structures – Connectors – Requirements
BS EN ISO 179-1, Plastics – Determination of Charpy impact properties – Part 1: Non-instrumented impact test
BS EN ISO 527-2, Plastics – Determination of tensile properties – Part 2: Test conditions for moulding and extrusion plastics
BS EN ISO 868, Plastics and ebonite – Determination of indentation hardness by means of a durometer (Shore hardness)
BS EN ISO 898-1, Mechanical properties of fasteners made of carbon steel and alloy steel – Part 1: Bolts,screws and studs with specified property classes – Coarse thread and fine pitch thread
BS EN ISO 898-2, Mechanical properties of fasteners made of carbon steel and alloy steel – Part 2: Nuts with specified property classes – Coarse thread and fine pitch thread
BS EN ISO 1133 (all parts), Plastics – Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics.BS 6349-1-4 pdf download.