IEC 61587-6-2021 pdf free download – Mechanical structures for electrical and electronic equipment – Tests for IEC 60917 and IEC 60297 series – Part 6: Security aspects for indoor cabinets.
This part of lEC 61587 specifies security aspects and security performance levels of themechanical construction of indoor cabinets in accordance with IEC 60917 (all parts) andIEC 60297 (all parts). This document does not address vandalism.
NOTE Protection against vandalism is typically controlled by user-specific requirements.
2Normative references
The following documents are referred to in the text in such a way that some or all of theircontent constitutes requirements of this document. For dated references,only the editioncited applies.For undated references, the latest edition of the referenced document (inciuding
any amendments) applies.
IEC 60297 (allparts)，Mechanical structures for electrical and electronic equipment -Dimensions of mechanical structures of the 482,6 mm (19 in) series
lEC 60529,Degrees of protection provided by enclosures (IP Code)
IEC 60917 (allparts)，Modular order for the development of mechanical structures forelectronic equipment practices
IEC 61587-1，Mechanical structures for electronicequipment – Tests for IEC 60917 andIEC 60297 series – Part 1: Environmental requirements，test set-up and safety aspects forcabinets, racks, subracks and chassis under indoor condition use and transportation
IEC 61587-2, Mechanical structures for electronic equipment – Tests for IEC 60917 andIEc 60297 – Part 2 : Seismic tests for cabinets and racks
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
Iso and lEC maintain terminological databases for use in standardization at the followingaddresses:
.IEC Electropedia: available at http://www.electropedia.orgl
– Iso Online browsing platform: available at http://www.iso.org/obp3.1
handle
<cabinet> mechanical component to open or close the door of a cabinet,equipped on thedoor of the cabinet
3.2
key
<cabinet> device to allow only authorized access to a cabinet, assembled into the handle of the cabinet or on the door of the cabinet
3.3
mechanical lock
<cabinet> mechanical component assembled in the door of a cabinet that secures the door to the frame or other structural member of the cabinet and is operated by the handle
3.4
multipoint mechanical lock
<cabinet> system of more than one mechanical lock operated by a single handle
3.5
access security level
<cabinet> level of security against unauthorized access, determined by the security measures needed to obtain access to the cabinet
Note 1 to entry: The access security level of an indoor cabinet depends on the type of installation site (building)
and on the cabinet’s location in the building.
3.6
access protection
<cabinet> protection against unauthorized access to a cabinet
3.7
security performance
<cabinet> performance of the mechanical components of a cabinet to achieve the intended protection against unauthorized access
Note 1 to entry: The mechanical components of the cabinet are shown in Figure 1.IEC 61587-6 pdf download.