IEC 60945-2002 pdf free download – Maritime navigation and radiocommunication equipment and systems – General requirements – Methods of testing and required test results.
This International Standard assists in meeting a requirement of the International Conventionfor Safety of Life at Sea (SOLAS), adopted by the International Maritime Organization (IMO),that the radio equipment defined in chapters lll and lV, and the navigation equipment definedin chapter V of the Convention， be type-approved by administrations to conform withperformance standards not inferior to those adopted by the lMO.(Administrations are definedby the lMO as governments of the states whose flags the ships are entitled to fly.)
The performance standard for general requirements for shipborne radio equipment andelectronic navigation aids that has been adopted by the lMO is given in lMO Resolution A.694and is reproduced in this standard as annex A, which forms the basis for this standard.Reference is made,where appropriate，to lMO Resolutions A.694 and A.813 and allsubclauses whose wording is identical to that in the resolutions are printed in italics.
This standard specifies minimum performance requirements, methods of testing and requiredtest results for general requirements which can be applied to those characteristics common toall equipment described hereunder:
a) shipborne radio equipment forming part of the global maritime distress and safety system
required by the International Convention for Safety of Life at Sea (SOLAS) as amended,and by the Torremolinos International Convention for the Safety of Fishing Vessels asamended;
b) shipborne navigational equipment required by the International Convention for Safety of
Life at Sea (SOLAS) as amended, and by the Torremolinos International Convention forthe Safety of Fishing Vessels as amended，and to other navigational aids,whereappropriate; and
c) for EMC only， all other bridge-mounted equipment,equipment in close proximity to
receiving antennas, and equipment capable of interfering with safe navigation of the shipand with radio-communications (see lMio Resolution A.813).
NOTE For EMC, this standard is in the lEC category “product family”.
The requirements of this standard are not intended to prevent the use of new techniques inequipment and systems, provided the facilities offered are not inferior to those stated.
2Normative references
The following referenced documents are indispensable for the application of this document.For dated references, only the edition cited applies. For undated references, the latest editionof the referenced document (including any amendments) applies.
IEC 60050-161:1990，International Electrotechnical Vocabulary (IEV) – Chapter 161:Electromagnetic compatibility
Amendment 1 (1997)
Amendment 2 (1998)
IEC 60068-2-1:1990,Environmental testing – Part 2:Tests – Tests A: ColdAmendment 1 (1993)
Amendment 2 (1994)
IEC 60068-2-2:1974,Environmental testing – Part 2:Tests – Tests B: Dry heatAmendment 1 (1993)
Amendment 2 (1994)
IEC 60068-2-5:1975,Environmental testing – Part 2: Test Sa: Simulated solar radiation atground level
lEC 60068-2-6:1995,Environmental testing – Part 2: Test Fc: Vibration (sinusoidal)Corrigendum 1 (1995)
IEC 60068-2-9:1975，Environmental testing – Part 2: Guidance for solar radiation testingAmendment 1 (1984) Corrigendum 1 (1989)
IEC 60068-2-30:1980，Environmental testing – Part 2: Test Db and guidance: Damp heat,cyclic (12 +12-hour cycle)
Amendment 1 (1985)
IEC 60068-2-48:1982，Environmental testing – Part 2: Guidance on the application of thetests of IEC 60068 to simulate the effects of storage
IEC 60068-2-52:1996，Environmental testing – Part 2:Test Kb: Salt mist, cyclic (sodiumchloride solution)
Corrigendum 1 (1996)
IEC 60071-2:1996,Insulation co-ordination – Part 2: Application guide
IEC 60092-101:1994，Electrical installations in ships – Part 101:Definitions and generalrequirements
Amendment 1 (1995)Corrigendum 1(1996)
IEC60417(all parts),Graphical symbols for use on equipment
IEC 60533:1 999, Electrical and electronic installations in ships – Electromagnetic compatibility
IEC 60651 :1 979, Sound level meters Amendment 1 (1 993)IEC 60945 pdf download.