IEC 60519-1-2020 pdf free download – Safety in installations for electroheating and electromagnetic processing – Part 1: General requirements.
This part of IEC 6051 9 specifies the general safety requirements for industrial installations or equipment intended for electroheating (EH) and electroheating based treatment technologies as well as for electromagnetic processing of materials (EPM). This document deals with the significant hazards, hazardous situations or hazardous events relevant to industrial EH and EPM equipment, as listed in Annex A, for normal operation and for single fault condition as well as under conditions of reasonably foreseeable misuse.
This document specifies the requirements intended to be met by the manufacturer to ensure the safety of persons and property during the complete life cycle of the equipment from design through commissioning, operation, maintenance, inspection, to decommissioning, as well as in the event of foreseeable single fault condition that can occur in the equipment.
The rated voltage of EH and EPM equipment can be in the range of low voltage; details are given in 4.2.
This document does not apply to equipment and appliances within the scope of
– IEC 60079 (all parts) – i.e. equipment intended for use in potentially explosive atmospheres;
– IEC 60335 (all parts) – i.e. household, commercial and similar electrical appliances,including room heating;
– IEC 60601 (all parts) – i.e. medical electrical equipment;
– IEC 60974 (all parts) – i.e. arc welding equipment;
– IEC 61 01 0 (all parts) – i.e. equipment for laboratory use.
This document does not provide requirements for type testing.
NOTE Industrial equipment covered by this document is typically produced as a single unit or a very small number of units; such unit usually has a very high value and can cause severe harm at disintegration.
This document does not address data security and hazards arising from neglect of security.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
IEC 60071 -1 :2006 1 , Insulation co-ordination – Part 1: Definitions, principles and rules
IEC 60071 -1 :2006/AMD1 :201 0
IEC 60204-1:2016,Safety of machinery – Electrical equipment of machines – Part 1: Generalrequirements
IEC 60204-11:2018,Safety of machinery – Electrical equipment of machines – Part 11:;Requirements for equipment for voltages above 1 000 v AC or 1 500 v DC and not exceeding36 kv
IEC 60228:2004,Conductors of insulated cables
IEC 60335-1:20102,Household and similar electrical appliances – Safety – Part 1: Generalrequirements
lEc 60335-1:2010/AMD1:2013IEC 60335-1:2010IAMD2:2016
IEC 60335-2-24,Household and similar electrical appliances – Safety – Part 2-24: Particularrequirements for refrigerating appliances, ice-cream appliances and ice makers
IEC 60335-2-89，Household and similar electrical appliances – Safety – Part 2-89: Particularrequirements for commercial refrigerating appliances with an incorporated or remoterefrigerant unit or compressor
IEC 60364-1:2005，Low-voltage electrical installations – Part 1: Fundamental principles,assessment of general characteristics, definitions
lEC 60364-4-41:20053,Low-voltage electrical installations – Part 4-41: Protection for safety -Protection against electric shock
IEC 60364-4-41:2005/AMD1:2017
IEC 60364-4-42:20104,Low-voltage electrical installations – Part 4-42: Protection for safety -Protection against thermal effects
IEC 60364-4-42:2010/AMD1:2014
IEC 60364-4-44:20075,Low-voltage electrical installations – Part 4-44: Protection for safety -Protection against voltage disturbances and electromagnetic disturbances
IEC60364-4-44:2007/AMD1:2015
lEC 60364-4-44:2007/AMD2:2018
IEC 60364-5-53:20016,Electrical installations of buildings – Part 5-53: Selection and erectionof electrical equipment – lsolation,switching and controi
IEC60364-5-53:2001/AMD1:2002
IEC 60364-5-53:2001/AMD2:2015
IEC 60364-5-54:2011,Low-voltage electrical installations – Part 5-54: Selection and erectionof electrical equipment – Earthing arrangements and protective conductors.IEC 60519-1 pdf download.